Nano-Antibeschlag Set for the nanotechnical treatment of glass, ceramic and synthetic surfaces for indoors and outdoors. The Nano-Antibeschlag gives your surfaces a long
lasting anti-fog effect. According to its hydrophilic character the new
pollution will be delayed strongly and the cleaning effect of the
treated surface will be considerably improved.
No more condensation of the car windows. The security and the
general well-being will be clearly increased through the clear
visibility.
- Anti-fog effect on all glass-,ceramic- and synthetic surfaces
- Increased security in road traffic
- Relieves considerably the cleaning of the treated surface
- Quick and easy apply
- The effect lasts for many months
Effect The Nano-Antibeschlag set is an optimal adjusted care- and sealing system which consists of a cleaner and of a nanotechnical sealing lacquer.
Through
the cleaning with the pre-cleaner and the following apply with the
Nano-Antibeschlag there'll put an ultra thin, invisible sealing coating
on the surface. The surface is protected for a long time against new
pollution and shows a clearly better cleaning effect.
The
Nano-Antibeschlag is in a soft way high effective and ensures a
completely clean and non condensed surface. The Nano-Antibeschlag
consists of nanotechnical particles which are combining fix with the
surface.
All the ingredients of the Nano-Antibeschlag
arrange independently during the apply. The binding components wander
to the treated surface; the anti-sticking componentsare orientating to
the air. At this kind of "self-organisation" the ultra thin, invisible
and neutral surface coating is protecting.
Oil, greases,
water and dirt can't combine anymore with the surface. Besides the
integrated caresystem is protecting the surface against harmful
environment influences even when using the product outdoors and ensures
for the valency of the treated surface. The Nano-Antibeschlag has been
developed for the care and for the sealing of all glass, ceramic and
synthetic surfaces.
The treated surface shows a strong slow
new pollution and an immense improvement of the cleaning effect
(hydrophoby). The anti-fog effect arises according to the weather
conditions after one day. The Nano-anti fog is suitable for outdoors
and indoors.
For cleaning the treated surface clear water is sufficient. You don't have to add detergents.
The
Nano-Antibeschlag protects the surface during several months and
contributes to your security and to your general well-being in the car.
When the effect is decreasing the procedure has to be repeated as
described. In the set you'll find everything what do you need for the
treatment of 10 sqm surface.
Application Cleaning of the surface
The better the pre-cleaning,
the better is the effect of the sealing. The surface has to be clean,
dry and completely free of grease , tenside and wax. Spray on the
sealing surface with the pre-cleaner and clean it with the drying
tissue. The cleaned surface has to be dried completely and don't touch
with your fingers anymore!The better the pre-cleaning, the better is
the effect of the sealing. The surface has to be clean, dry and
completely free of grease , tenside and wax. Spray on the sealing
surface with the pre-cleaner and clean it with the drying tissue. The
cleaned surface has to be dried completely and don't touch with your
fingers anymore!
Application of the Nano-Antibeschlag
Open
the Nano-Antibeschlag Sachet and take off the tissue. One
Nano-Antibeschlag tissue is sufficient for the coating of approx. 1
sqm. You have to rub sparingly and constantly the Antifog with the
tissue on the surface which has to be sealed. Afterwards the surface
has to be dried for minimum 15 - 30 minutes. Then polish slightly the
surface with the enclosed drying tissue in order to remove surplus
coating ( coating or white stripes ). The antifog effect will occur
after one day depending on the weather conditions. When the effect is
decreasing the procedure can be repeated as descriped.
Informationdeal manufacturing conditons are lying at a environment temperature from 10 degrees.
Don't apply the Nano-Antibeschlag under direct sun exposure.
We recommand to wear gloves when manufacturing.
|
