Nano-Stein-Protector Anti-dirt sealing for sucking mineral grounds.
Watery,
inorganic-organic coating material upon the basis of the chemical
nanotechnology. Self organising antisticking-components confer your
surface an invisible coating with hydrophobic and olephobic
characteristics.
The Nano-Stein-Protector is
many-sided usable for open pored, sucking mineral grounds. Dirt-and
water resistant long-term coating for all porous materials.Very
effective against moss-and seaweed growth.
Advantages of "Nano-Stein-Protector":
- new technology combines advantages of flexible polymer coatings and hard nano particles
- better long-term-soiling protection
- better resistance against rubing
- optic of the substrat remains unchanged
- waterbased
- simple application
Characteristics
No oil, no lacquer, no visible changements at the treated material
The nanoparticles cover the pores and protect the stone:
- breathing active
- pore deep protection against new water absorption
- water and oil peel off and can't reach the material
- preventing protection against moss attacks
- resistant against seawater and salty air, resistant against acid rain
- UV light-solid
- silicon,-wax-and oil free
- keeps its effect without abrasion for more than 3 years
- high production through very low coating thickness - one liter is sufficient for up to 20 sqm
Effect
- Impregnation is possible on all untreated stone surfaces
- Preventing protection against moss attacks and soiling on roofing tiles, terraces stones, paving stones a.s.o.
- Also usable on concrete, concrete stones, natural stones, bricks, roughcast floor spaces, fugued tile coverings, fibre cement.
Application
Dead easy application trough painting,
rolling or spraying. Because there isn't arising any optical
modification on the treated material the junction area ( p. ex.
rubbersealings ) hasn't to be covered. The surface has to be clean and
dry before application. That means no grease, or surfactants ( soap
residues ). Before using shake well. Not back pouring into store
vessels. Clean application utensils and vessels with water. It drys at
15-20 degrees after approx. 1-2 hours and gets the hydro-and oleophob
dripp of effect already after 4 hours.
Preparation of the ground
- disposal of structural damage
- disposal of loose dirt, seaweed and moss ( p.ex. with Kärcher-watersteambeam machine)
Application of the coating
drying time approx. 6 hours (20 degrees), completely grown hard after 7 days
Information
Ideal
manufacturing conditions are lying at an environment temperature from
10 up to 25 degrees. The storage temperatures below 5 degrees and above
40 degrees have to be avoided.
Don't apply the Nano-Stein-Protector under direct sun exposure.
The Nano-Stein-Protector shouldn't been used in closed rooms.
We recommend wear gloves when manufacturing.
|
